Clear and Flexible Epoxy Resin 1000ml 1:1 by Volume

EPOXY RESIN Clear FLEXIBLE RESIN

1:1 mixing ratio 

 Eparency Australian Manufactured

Note: This resin cures flexible so not like the regular hard epoxy. Fully set resin bends, bounce and flex like tire rubber and it is ultra clear. Its like the flexible polyurethane but without the foaming problem. Suitable for making belts, artificial skins, phone cases, toys, electronic embedding, Electronic Potting, Flexible Adhesive And Coating and much more (you need mould release if you use Eparency Flexible Epoxy to make mould)or anything that requires both toughness and flexibility.

Mix resin and hardener EXACTLY in 1:1 ratio. Use a plastic or silicone container for mixing. Scrape sides and bottom of container to fully integrate products. Please use a mixing container that is clean and free of contamination. Tiny contamination would deteriorate the quality of final result. Do not use metal, especially aluminium containers to mix. Mixtures will turn milky colour in aluminium containers. 

Setting within 24-72 hours

Excellent Bubble Release

Fully set resin bends, bounce and flex like tire rubber and it is ultra clear. Its like the flexible polyurethane but without the foaming problem.

Note:

Do NOT bend before the resin is fully set.

Do NOT pour over 30mm to avoid overheating

★ No VOC; Zero Solvent; BPA Free; Eco Friendly; Meet and Exceed Australian Standard AS 2311-2017 and ASTM D3960-05

★ Crystal Clear Finish: Cures Crystal Clear. One of the clearest epoxies you can find. Suitable for wooden bar tops, embedding pictures, bottle cap table projects & more

★ UV Resistant Formula: Added UV Inhibitors resist yellowing when exposed to the sun and Ultra Violet light

★ Self Level Mixture: Will self level over surfaces including corners, bar rails and edges leaving consistent thickness

★ Superior Air Release: Some epoxies may bubble, fish eye or crater. Our formula features superior air release, minimizing these concerns

★ Impact Resistant: Cures super strong, leaving a smooth impact resistant surface

★ Minimal odour and NOT AT ALL yellowing after long period of time.

★ Easy To Use: 1 to 1 by volume mix ratio

Eparency Flexible Epoxy is a 2 part Epoxy resin which when mixed with hardener is poured into a mould and sets to a strong, flexible finished product. Eparency is resistant to most household chemicals. This product can be used for outdoor use.

Following factors affect the curing time:

Mixing quantity (the more you mix, the fast it cures and vice versa)

Room Temperature (higher room temperature will speed up the curing)

Mixing ratio: 1:1 (1 Parts A and 1 Part B)

Application temperature: Wide temperature range through summer to winter

Pot life(working time): 1-2 hours (Data based on 100ml mixing; 20 degree C room temperature). Please pour this product into mould as soon as possible, to avoid bubbling.

Time to reach non-tacky: 5-18 hrs Depending on the room temperature (Data based on 100ml mixing)

Time to reach full cure: 72 hrs (Data based on 100ml mixing)

Viscosity: 700 cps for Part A (Brookfield 20 rpm)

350 cps for Part B (Brookfield 20 rpm)

Clarity: Pt-Co value < 10 for both Part A and Part B

Compatibility: Binding to metal, inorganic materials including cement; glass, stone, natural materials including wood; particle board, most plastics except polyethylene, polypropylene, EPDM. 

Available order quantity: 500 Mls, 1 Ltr, 2 Ltr 4 Ltr

Shelf life: 3 months