Varnishes (9)


9 products


Varnishes

Craft Finishes and Rub ’n Buff

The current range features AMACO Rub ’n Buff wax-metallic finishes for painted wood, frames, ornaments, post-fired ceramics and decorative mixed media. Choose from gold, copper, silver, pewter and ebony tones to add metallic colour, restore worn details or create an aged finish.

If you need a clear craft varnish or sealer rather than a metallic finish, browse our artist picture varnishes and acrylic and craft mediums.

How to choose a craft finish

Start with the result you want. Rub ’n Buff is made for adding metallic colour and lustre to decorative surfaces. It is useful for antiquing, stencilling, frame restoration, costume details and highlighting raised areas.

Choose gold, copper or silver for a brighter metallic effect. Pewter and ebony create a darker, more aged finish. The final sheen depends on how much you buff the surface. More buffing produces more shine.

Rub ’n Buff is a decorative wax finish rather than a clear protective varnish. If your project needs a transparent gloss, satin or matte top coat, choose a suitable craft or artist varnish instead.

Rub ’n Buff metallic finishes

AMACO Rub ’n Buff is made from carnauba waxes, fine metallic powders and pigments. It creates a metallic finish that can be layered and buffed to change the depth and shine.

The current range includes:

  • Gold Leaf
  • Antique Gold
  • Grecian Gold
  • European Gold
  • Autumn Gold
  • Spanish Copper
  • Silver Leaf
  • Pewter
  • Ebony

Gold Leaf and Silver Leaf create brighter highlights. Antique Gold, Grecian Gold and European Gold offer different warm and cool gold tones. Spanish Copper and Autumn Gold add warmth, while Pewter and Ebony suit darker or aged effects.

Preparing the surface

Rub ’n Buff adheres best to a clean, dry surface with enough texture for the wax to grip. Remove dust, dirt, grease and loose finish before applying it.

Lightly sanding a smooth surface with fine-grit sandpaper can improve adhesion. If the material cannot be sanded, apply a compatible primer first. Always test the preparation method on an inconspicuous area, especially on coated, delicate or valuable surfaces.

For painted craft and layered effects, Jo Sonja acrylic paints and mediums can be used to create the base colour before the metallic finish is added. Allow the paint to dry according to its instructions before continuing.

How to apply Rub ’n Buff

Apply a small amount to the prepared surface using a gloved finger, cotton bud, paper towel or soft cloth. Work on a small area at a time because a little product covers more than you might expect.

  1. Clean and prepare the surface.
  2. Apply the first coat with a paper towel, gloved finger or soft cloth.
  3. Let it set for a few seconds.
  4. Apply another coat if more coverage is needed.
  5. Buff the finish gently as it dries to develop the desired shine.

Raised details can be highlighted with a light application, while broader areas can be covered in thin, even coats. Test the colour first because the base surface can affect the finished appearance.

Using Rub ’n Buff on wood, ceramics and mixed media

Rub ’n Buff can be applied to clean, prepared or previously painted surfaces. It is commonly used on wooden frames, decorative boxes, ornaments, post-fired ceramics, costume pieces, 3D-printed objects and mixed-media projects.

On raw wood or MDF, a primer or painted base can produce a more even result. On smooth or glossy surfaces, lightly sanding or priming may help the finish adhere. For additional surface effects, browse our craft paint textures and mediums.

Rub ’n Buff is not an archival material and is not recommended for surfaces exposed regularly to moisture or electricity. It should also be kept away from direct heat.

Sealing Rub ’n Buff

Decorative indoor pieces may not need an additional sealer. For objects that will be handled regularly or may come into contact with moisture, a compatible water-based or acrylic sealer can help the finish last longer.

Test the sealer on a hidden area first. Some sealers can alter the metallic colour or reduce the sheen. Follow the directions for both products and allow each layer to dry before applying the next.

For fine art paintings on stretched canvas or board, use a dedicated artist picture varnish rather than Rub ’n Buff. Picture varnishes are designed specifically for painted artworks, so check the individual product instructions for compatibility, drying time and removability.

Brushes, cloths and applicators

A soft cloth, cotton bud or gloved finger gives you the most control when applying Rub ’n Buff. Cotton buds are useful for grooves and small decorative details, while a soft cloth works well across larger or raised areas.

For other brush-on finishes, light coats and a suitable brush help reduce visible marks. Browse soft varnishing brushes or use foam brushes and sponges for larger flat surfaces.

Safety and storage

Wear gloves during application and follow the cautionary information on the tube. Rub ’n Buff is restricted from use by children under 13. Older users should follow all product warnings and work with appropriate adult supervision where required.

Keep the tube tightly capped when not in use. The wax can separate or dry over time, so massage the closed tube gently before use if the consistency appears uneven.

Rub ’n Buff has a maximum recommended temperature of approximately 49°C and should be kept away from direct heat. It is not recommended for unsealed outdoor projects or areas regularly exposed to water.

Why shop with Riot

  • More than 40 years supporting Australian makers across every skill level
  • Nine AMACO Rub ’n Buff colours currently available for decorative metallic finishes
  • Customer support Monday to Friday, with a reply aim of one business day
  • Shipping and returns across Australia with clear published policies

FAQs

What is Rub ’n Buff?

Rub ’n Buff is a wax-based metallic finish made from carnauba waxes, metallic powders and pigments. It is applied in thin layers and buffed with a soft cloth to create a metallic sheen. It is commonly used for antiquing, stencilling, restoration and decorative craft.

What surfaces can I use Rub ’n Buff on?

Rub ’n Buff can be used on clean, dry or previously painted surfaces, post-fired ceramics, 3D-printed objects and some leather surfaces. Smooth materials may need light sanding or a suitable primer to give the finish enough texture to grip.

Does Rub ’n Buff need to be sealed?

Not every indoor decorative project needs sealing. A compatible water-based or acrylic sealer can improve durability on pieces that will be handled or exposed to occasional moisture. Test first because the sealer may change the colour or sheen.

Is Rub ’n Buff a varnish?

No. Rub ’n Buff is a coloured wax-metallic finish rather than a clear protective varnish. Use it to add metallic colour and highlights. Choose a dedicated craft or artist varnish when you need a transparent protective top coat.

Can Rub ’n Buff be used outdoors?

AMACO does not recommend Rub ’n Buff for unsealed outdoor use. If you use it outdoors, apply a compatible water-based or acrylic sealer and be aware that weather exposure may still shorten the life of the finish.

Is Rub ’n Buff suitable for children?

Rub ’n Buff is restricted from use by children under 13. Older users should follow the cautionary labelling and wear gloves during application. Keep the product securely stored when it is not being used.

Do you deliver craft finishes across Australia?

Yes, we ship available Rub ’n Buff metallic finishes across Australia. Delivery costs and estimated timeframes are shown at checkout and on our shipping information page. Rub ’n Buff cannot be shipped by air, so some delivery services or destinations may be restricted.

You might also need